Pages

Powered By Blogger

Sunday, 24 March 2013

Monolithic Isolation Joints

www.kamps.com.my





Kamps Energy (M) Sdn Bhd is the exclusive distributor for ALFA Engineering Società Cooperativa, Italy, Monolithic Isolation Joints and Anchor Flanges product in South East Asia (Malaysia, Indonesia, Brunei, Vietnam & Philippines) and Middle East Territory (Kuwait & Qatar)


  






ALFA Monolithic Isolation Joints are boltless and completely factory assembled in accordance with the appropriate requirements of ASTM, API, DIN and BS codes.  All welds are butt weld construction.
The dielectric isolation material are made of a thermosetting fiberglass epoxy material. Sealing is performed with double self energized “O” rings housed in accurately machined grooves, fully protected from cavitation in full compliance with ASME design codes.
Interior and exterior coating is a two part epoxy with 300 mm epoxy within 2 inch of each end.

Each isolation joint is electrically tested @ 5 kV, and 200 Mohm isolation test. Each isolation is also hydrostatically tested @ 1.5 x D.P.
All welds are subject to Ultrasonic/MPI/DP and Xray examination.


Quality Assurance

Each Monolithic Isolation Joint is designed and manufactured at our plants in Bastiglia (Italy) that has a registeredISO 9001:2000 Quality Management System.
Copy of current ISO 9001:2000 certificate is available upon request.

Warranty 

All Alfa Engineering products are warranted against failure caused by manufacturing defects for a period of 1 year. Any product found to be so defective and returned to us within one year from date of shipment will be replaced without charge.


 





This warranty is made in lieu of, and we disclaim, any and all other warranties, expressed or implied, including the warranties of merchantability and fitness for a particular purpose, and buyer agrees to accept the products without any such warranties.
We hereby disclaim any obligation or liability for consequential damages, labor costs or any other claims or liabilities of any kind whatsoever.


WHY TO USE MONOLITHIC ISOLATION JOINTS
 
ALFA Isolation Joints serve as a positive leak proof, long lasting block against the flow of electric current in all piping systems. When you put ALFA Isolation Joints into service, you bury maintenance cost forever.

SOME FEATURES FOR SYSTEM OPERATORS AND ENGINEERS

Eliminates Short Circuits

Bolts, sleeves and washers, the major cause of short circuits in most isolation assemblies are eliminated when using ALFA Monolithic Isolation Joints. 

Eliminates Field Assembly

Isolation Joints are completely factory assembled and tested. There are no flanges,gaskets, nuts, bolts, sleeves or washers to handle and consequently no fluid leaks due to improper field assembly.

Less Expensive

You can purchase ALFA Monolithic Isolation Joints for less than the cost of the component parts of insulated flange assemblies in most pipe sizes. You can install ALFA Monolithic Isolation Joints for less than the labor costs of installing and insulated flange assembly.



How to Order
To order ALFA Monolithic Isolation Joints, please indicate the following:
A
Quantity
B
Nominal Pipe Size
C
ANSI, DIN, API pressure class or actual working pressure
D
Pipe Grade
E
Wall Thickness
F
Working Temperature
G
Fluid Conveyed
H
Eventually provide us any project specification if available

 For more information about our company, product and enquiry please visit our website.


Contact us:

Website: www.kamps.com.my

1 comment: