Pages

Powered By Blogger

Sunday 28 July 2013

Manpower Supply





www.kamps.com.my

Manpower Supply


KAMPS ENERGY also provide wide range of manpower force such as skilled, semi-skilled and general workers. This includes professional such as engineers, skilled and semi skilled workers such as crane operator, pipe fitters, insulator, tinsmith, welder, cable pulling, roller painters, electricians, scaffolders and many more. Whether your company requires long term solutions or short term emergency cover, we are here to help you with an efficient and value added service.

All our employees are vetted for good character, qualifications and experience. Our team makes serious efforts to ensure all crew and workers are suitable for the job responsibilities and our clients’ requirements. Our dedicated team ensures the prompt mobilization and de-mobilization of crew and workers.

We provide our services mainly for oil and gas sector, energy and constructions activities in various technical fields, among others:


  • Process
  • Mechanical
  • Piping
  • Instruments
  • Fabrication
  • Electricity
  • Civil Works
 







 
NOTE: Please email your CV or resume to info@kamps.com.my for our manpower supply department data entry and record. Should there be any future requirements for your expertise we will contact you directly.

For more information about our company, product and enquiry please visit our website. Don't forget to LIKE & SHARE our Facebook Page and this blog with your colleague, friend and family. 


Contact us:

Website: www.kamps.com.my
Our FaceBook Official Page: https://www.facebook.com/www.kamps.com.my

Sunday 24 March 2013

Monolithic Isolation Joints

www.kamps.com.my





Kamps Energy (M) Sdn Bhd is the exclusive distributor for ALFA Engineering Società Cooperativa, Italy, Monolithic Isolation Joints and Anchor Flanges product in South East Asia (Malaysia, Indonesia, Brunei, Vietnam & Philippines) and Middle East Territory (Kuwait & Qatar)


  






ALFA Monolithic Isolation Joints are boltless and completely factory assembled in accordance with the appropriate requirements of ASTM, API, DIN and BS codes.  All welds are butt weld construction.
The dielectric isolation material are made of a thermosetting fiberglass epoxy material. Sealing is performed with double self energized “O” rings housed in accurately machined grooves, fully protected from cavitation in full compliance with ASME design codes.
Interior and exterior coating is a two part epoxy with 300 mm epoxy within 2 inch of each end.

Each isolation joint is electrically tested @ 5 kV, and 200 Mohm isolation test. Each isolation is also hydrostatically tested @ 1.5 x D.P.
All welds are subject to Ultrasonic/MPI/DP and Xray examination.


Quality Assurance

Each Monolithic Isolation Joint is designed and manufactured at our plants in Bastiglia (Italy) that has a registeredISO 9001:2000 Quality Management System.
Copy of current ISO 9001:2000 certificate is available upon request.

Warranty 

All Alfa Engineering products are warranted against failure caused by manufacturing defects for a period of 1 year. Any product found to be so defective and returned to us within one year from date of shipment will be replaced without charge.


 





This warranty is made in lieu of, and we disclaim, any and all other warranties, expressed or implied, including the warranties of merchantability and fitness for a particular purpose, and buyer agrees to accept the products without any such warranties.
We hereby disclaim any obligation or liability for consequential damages, labor costs or any other claims or liabilities of any kind whatsoever.


WHY TO USE MONOLITHIC ISOLATION JOINTS
 
ALFA Isolation Joints serve as a positive leak proof, long lasting block against the flow of electric current in all piping systems. When you put ALFA Isolation Joints into service, you bury maintenance cost forever.

SOME FEATURES FOR SYSTEM OPERATORS AND ENGINEERS

Eliminates Short Circuits

Bolts, sleeves and washers, the major cause of short circuits in most isolation assemblies are eliminated when using ALFA Monolithic Isolation Joints. 

Eliminates Field Assembly

Isolation Joints are completely factory assembled and tested. There are no flanges,gaskets, nuts, bolts, sleeves or washers to handle and consequently no fluid leaks due to improper field assembly.

Less Expensive

You can purchase ALFA Monolithic Isolation Joints for less than the cost of the component parts of insulated flange assemblies in most pipe sizes. You can install ALFA Monolithic Isolation Joints for less than the labor costs of installing and insulated flange assembly.



How to Order
To order ALFA Monolithic Isolation Joints, please indicate the following:
A
Quantity
B
Nominal Pipe Size
C
ANSI, DIN, API pressure class or actual working pressure
D
Pipe Grade
E
Wall Thickness
F
Working Temperature
G
Fluid Conveyed
H
Eventually provide us any project specification if available

 For more information about our company, product and enquiry please visit our website.


Contact us:

Website: www.kamps.com.my

Friday 7 December 2012

Personal Protective Equipment (PPE) - Chemical Protection Product of TST-Sweden


Kamps Energy is Distributor for TST-Sweden Product in Malaysia.



www.kamps.com.my


Chemical Protection




Ammonia Kit


Chemical Escape Hoods


Filter Information


Boots, Protective Overalls & Insulating Gloves


Smarthose - Chemicals & Fire Fighting


Leakage & Collection - Acids & Bases



Basins - Acids & Bases


Spring-lid Seals



Size & Coversion Tables for Shoe Size and Overalls










Contact us:

Website: www.kamps.com.my








Tuesday 29 May 2012

Floating production storage and offloading (FPSO)


www.kamps.com.my


USAN World Largest FPSO
floating production, storage and offloading (FPSO) unit is a floating vessel used by the offshore oil and gas industry for the processing of hydrocarbons and for storage of oil. An FPSO vessel is designed to receive hydrocarbons produced from nearby platforms or subseatemplate, process them, and store oil until it can be offloaded onto a tanker or, less frequently, transported through a pipeline. FPSOs are preferred in frontier offshore regions as they are easy to install, and do not require a local pipeline infrastructure to export oil. FPSOs can be a conversion of an oil tanker or can be a vessel built specially for the application. A vessel used only to store oil (without processing it) is referred to as a floating storage and offloading vessel (FSO).


FPSO Diagram
Mechanisms
Oil produced from offshore production platforms can be transported to themainland either by pipeline or by tanker. When a tanker is chosen to transport the oil, it is necessary to accumulate oil in some form of storage tank such that the oil tanker is not continuously occupied during oil production, and is only needed once sufficient oil has been produced to fill the tanker. At this point the transport tanker connects to the stern of the storage unit and offloads oil.

FPSO Mooring Lines & Risers

In the early days, the storage units consisted of decommissioned oil tankers, which were stripped down and equipped with process/production facilities (becoming therefore FPSOs), and were connected to a permanent mooring point. Today, there are two main types of FPSOs, those built converting an existing oil tanker, and those that are purpose-built. The FPSO design will depend on the area of operation. In benign waters the FPSO may have a simple box shape or it may be a converted tanker. Generally (but not always) the production lines (risers) are connected to a major component of the vessel, called a Turret, which allows the vessel to rotate in order to head into the wind and reduce environmental forces on the moorings.  In relatively calm waters, such as in West Africa, turrets can be located externally to the ship structure, hanging off the bow of the FPSO. For harsher environments like the North Sea, the turret is generally located internally. The turrets, mooring lines and risers can be designed to be permanently connected (i.e. to remain on location for long periods of time), or disconnectable (i.e. capable of "quick disconnection" through a procedure lasting just a few hours). Most ship-shaped FPSOs in the North Sea are purpose-built and are permanently moored.
FPSO Diagram
Gas recovered/separated during production may be used as fuel on Marine energy resource units (MRU) fitted on board. As continuous flaring is discouraged or disallowed in many areas of the world, the excess gas is generally exported through subsea pipelines. Water separation may be carried out using Dehydrators or Hydro Cyclones.

Advantages
Floating production, storage and offloading vessels are particularly effective in remote or deepwater locations where seabed pipelines are not cost effective. FPSOs eliminate the need to lay expensive long-distance pipelines from the processing facility to an onshore terminal. This can provide an economically attractive solution for smaller oil fields which can be exhausted in a few years and do not justify the expense of installing a pipeline. Furthermore, once the field is depleted, the FPSO can be moved to a new location. In areas of the world subject to cyclones (northwestern Australia) or icebergs (Canada), some FPSOs are able to release their mooring/riser turret and steam away to safety in an emergency. The turret sinks beneath the waves and can be reconnected later.


FSO Unit
Specific types
floating storage and offloading unit (FSO) is essentially a simplified FPSO without the capability for oil or gas processing. Most FSOs are converted single hull supertankers. An example is Knock Nevis, ex Seawise Giant, for many years the world's largest ship, which has been converted to an FSO for use offshore Qatar.
LNG floating storage and regasification unit



At the other end of the LNG logistics chain, 
where the natural gas is brought back to 
ambient temperature and pressure, specially modified ships may also be used as floating storage and regasification units (FSRUs). A LNG floating storage and regasification unit receives liquefied natural gas (LNG) from offloading LNG carriers, and the onboard regasification system provides natural gas exported to shore through risers and pipelines.
Mooring systems for FSO, FPSO & FSU units are available in market which allow the vessel to be moored on a ice sheet.
Article from Wikipedia, the free encyclopedia








Contact us:

Website: www.kamps.com.my


Notice: Photos are used for illustrations purposes only and does not in any way express ownership or any title to the same.

Disclaimer

"All images are sourced from the internet and are in the public domain. We claim no credit for any images or videos featured on this site unless otherwise noted. All visual content is copyright to it's respectful owners. If you own rights to any of the images or videos, and do not wish them to appear on this site, please contact us via e-mail and they will be promptly removed. We are not responsible for content on any external website, and a link to such site does not signify endorsement. Information on this site may contain errors or inaccuracies; the site's proprietors do not make warranty as to the correctness or reliability of the site's content."